Shawn
- Total activity 468
- Last activity
- Member since
- Following 0 users
- Followed by 4 users
- Votes 1
- Subscriptions 245
Articles
Recent activity by Shawn-
What are the dimensions of the SR-447HPC2?
(W) 6.2 (H) 1.9 (D) 9.7 including protruding parts on depth to include knobs on the front panel. It's the same size as a Cobra 25LTD.
-
I have a 655hp, how do I get to bands F-L?
You will need to go into the function menu and then find GRO: This allows you to select what bands are available using the band selector knob. The first option is A-E and the second is F-L.
-
Installation instructions for the CTCSS Board
How to add CTCSS in SR-94HPC 1. Remove R254/R255 as show in the photo： Tips on removing the SMT resistors 2. Remove this 2 screws but keep them for next ...
-
How long of microphone cord does the SR-94HPC radio have?
Without stretching the cord, it's about 28 inches, but it will easily stretch to over 60 inches. The microphone cord is very pliable, so even in cold climates, it extends easily. You can always ext...
-
Is the Stryker SR-94HPC CB radio capable?
No, the SR-94HPC is a 10 meter radio and thus does not work on CB Channels.
-
I'd like to buy the CTCSS for the SR-955HPC, where can I buy one?
The CTCSS module can be purchased right on our website. Here is a link directly to the product page: http://strykerradios.com/store/ctcss-module-for-stryker-sr-955hpc-10-meter-radios/Thank you!
-
How do I change the power from Hi to Low?
You will need to go into the function menu to change the power output setting. Short Press key, F UNC button and then short press the MT/SET button. Next short press the FUNC button until you fi...
-
Radio shows SWR HI When you key the microphone to transmit
Question SR-655HPC / SR-955HPC that beeps when you try to transmit. It does show SWR HI on the meter when this happens. I have changed the antenna, and the radio does the same thing. Solution ...
-
: Can you explain the proper operation of the ASQ option on the 447HPC2? If ASQ is active, does the squelch control need to be adjusted, and if not, at what signal level does it open?
On the SR-447HPC2, if the ASQ option is activated and you'd like to turn it on, rotate the squelch control all the way to the left. To turn the ASQ off and switch to manual squelch operation, turn ...
-
Where can I find a store that sells your radios?
Our dealer locator will assist you in finding a nearby dealer or website to order. You can search based on your Zip Code or City & State. Here is a link to our Where to buy page. http://strykerradi...