Shawn
- Total activity 468
- Last activity
- Member since
- Following 0 users
- Followed by 4 users
- Votes 1
- Subscriptions 245
Articles
Recent activity by Shawn-
Center Clarifier Alignment SR-955HPC
Answer Adjust the radio, so it's on frequency. Next, turn the radio off and center the clarifier knobs Turn the radio back on, and everything should be aligned
-
Dimming the display lights on the SR-497HPC
If you push and hold the color button, it will gradually dim the radio. Release the button when you are happy with how dim the lighting on the radio is.
-
High SWR shutdown - How to Temporarily Turn it Off
Sometimes you will need to turn off the high SWR shut down to set the SWR on a new antenna. To turn the SWR shutdown off, on the SR-655HPC / SR-955HPC, you will need to use the function menu, Hold...
-
Why is your SWR too high?
Why do you have a high SWR? An inappropriate ground plane is one of the major causes of high SWR readings. A sound ground plane with a full metal surface should be selected. The ground straps s...
-
Wrench size needed for SR-A10 extension shaft coupler?
You will need a 12mm wrench and a 14mm wrench. The picture below shows the proper placement of the wrenches.
-
Hooking up radio to directly to the Battery
If you plan on running your power wire directly to the battery, you can extend the stock power cord using 10 gauge wire. You will not run your ground (black wire) to the battery. Instead, find the...
-
SR-447HPC2 Error Codes and what they mean
Here is the full list of error codes for the SR-447HPC2, they are visible on the channel display. E1：VOLTAGE LOW - Test the voltage at the power cord, it should be no less than 12v DC E2：VOLTAGE H...
-
Dual Knobs Sticking Together
Try pushing in on the circle knob (closest to the radio). That might separate them enough. If not, place some blue tape on the front of the radio, and you can pry them loose with a tool preferably ...
-
Register New Stryker Product
To register and activate the warranty, please visit: https://strykerradios.com/registration-form
-
How to reset the SR-94HPC
14. RST: Resume factory default 1.Enter FUNC MENU, choose NO. 14 function menu.2.Press [PUSH] key to enter the function setting, the chosen menu value in LCD will turn togreen color.3.Turn channel ...