Shawn
- Total activity 468
- Last activity
- Member since
- Following 0 users
- Followed by 4 users
- Votes 1
- Subscriptions 245
Articles
Recent activity by Shawn-
Why can't I hear my Roger Beep through my Talkback?
It is normal for the roger beep not to be heard through the talkback. We recently changed this, so new radios (mid-2016 and newer) will have the roger beep, so you hear it through the talkback....
-
In what country is the SR-955HPC Manufactured?
The SR-955HPC is manufactured in China.
-
Is the swr meter on the radio accurate enough to set antennas or should I get a meter?
The SWR meter that is on the front of the radio is very accurate and can be trusted. You do not need to use an external SWR meter with these radios. If you feel that the readings on the front of th...
-
What fuse do I need for the SR-955HPC?
The SR-955HPC, SR-655HPC & SR-447HPC2 use a 15 amp fuse. The SR-497HPC is a 20 amp fuse located on the back of the radio. A 10 amp fuse is used with the SR-94HPC.
-
When I Transmit my the display shows my Voltage Drops
A voltage drop during transmit is normal on the SR-655HPC, SR-955HPC & SR-89MC.
-
What size fuse is recommended for the inline holder?
The SR-955HPC, SR-655HPC & SR-447HPC2 use a 15 amp fuse.
-
Low Speaker Volume or Low Talkback Even With Control Set to Max
This only applies to version 1 radiosThe process below is helpful if you are experiencing low receive volume or low talkback volume. Newer radios have a small amount of adhesive to prevent the conn...
-
Does the 955 have all the am channels that 497 does?
Yes, in fact, it has more channels than the SR-497HPC. The SR-497HPC will put out about 20 more watts, but it does not have a frequency counter or sideband like the SR-955HPC. Here is an easy way...
-
My receive dropped off, and I can only hear radios that are close to me.
Have you tried doing a full reset on the radio? If you’d like to reset all of these options to the default settings, please do the following.With the radio turned off, press and hold the FUNC, COLO...
-
I ordered a Stryker 955 HPC from a dealer the other day and i wonder if the USB programming cable is included in the box or i have to buy it separately ??
It should be in the box. If not, please let us know and we will mail you one out.